Products - Penetrators - Packer
RMS packer penetrators are single piece products, often with a factory moulded MLE and pothead. By fitting these in a controlled environment two potential weak
points in the completion; the lower connector and the splice onto the
MLE, are removed.
RMS penetrators are fitted to the packer by way
of an adapter. These adapters fit all RMS
penetrators and are available as fixed or
adjustable (5”, 8” & 24”) with the option
to offset, giving a range of options to suit
every completion.
RMS also produce a breakaway penetrator for use in offshore drill stem testing and is designed to maintain the pressure integrity of the well should the workover rig be blown off station.
Specification:
points in the completion; the lower connector and the splice onto the
MLE, are removed.
RMS penetrators are fitted to the packer by way
of an adapter. These adapters fit all RMS
penetrators and are available as fixed or
adjustable (5”, 8” & 24”) with the option
to offset, giving a range of options to suit
every completion.
RMS also produce a breakaway penetrator for use in offshore drill stem testing and is designed to maintain the pressure integrity of the well should the workover rig be blown off station.
Specification:
- 140A to 180A, 5kV Tested to IEC502 (5kV system tested to 28kV)
- Pressure tested to 150% of operating pressure
- Stainless steel body as standard to NACE MR01-75
- Universal fitting to all Packer types
