Products - Penetrators - Wellhead - Power - TAC
The RMS Top Angle Penetrator (TAC) is a two piece system comprising a mandrel and surface connector.
Installation of the product has been made as
easy as possible. For example; the
mandrel is bottom fed meaning that
horizontal splicing is possible and
the fix ring runs on ball bearings
meaning that the installation of the
surface connector can be done by hand.
There are several designs of TAC to suit
different wellhead configurations.
Specification:
Installation of the product has been made as
easy as possible. For example; the
mandrel is bottom fed meaning that
horizontal splicing is possible and
the fix ring runs on ball bearings
meaning that the installation of the
surface connector can be done by hand.
There are several designs of TAC to suit
different wellhead configurations.
Specification:
- 140A to 180A, 5kV Tested to IEC502 (5kV system tested to 28kV)
- Pressure tested to 150% of operating pressure
- Stainless steel body as standard to NACE MR01-75
- Eexd IIC T3 (Tamb -20C to +55C) approved for use in hazardous areas
- Accomodates most cable types
